Documentation Center

Installer parameters- checklist

This checklist provides you with information on all the parameters you need to know and enter when you run the SDL Enrich installer.

ParameterDescriptionValue
Destination folderDirectory in which to install the SDL Enrich application. This will form part of the final URL at which the server will be accessed.By default this is: C:\Program Files\SDL\SDL Enrich\
Web settings - for a web application.
Web siteSelect the web site in which to install this web application.Chosen from a list of available web sites.
Alias

The name for this web application. This name cannot contain any spaces (for compatibility reasons).

Choose a recognizable and user-friendly name for your web application.
Web settings- for a web site.
Web site

The name for the SDL Enrich web site.

Choose a user-friendly name for your site. This name appears in the tree of IIS Manager.
IP Address

IP address on which the website will listen. An example of an IP address is: 123.123.123.123.

Chosen from a list.Usually this will be "All Unassigned".
Port Number

Type the port on which HTTPS must listen for requests made to this Web site.

The default port is 443. If you specify a port different from the default ports, clients must specify the port number in requests to the server in order to connect to the Web site
SSL Certificate

Select the certificate that you want the Web site to use for SSL. This is the certificate used to verify the identity of the website.

Chosen from a list. If there is nothing in this list, then you need to install a certificate prior to running the installer.
Secure Token Service
Issuer

Specify the endpoint of the STS for the Passive Profile.

•SDL LiveContent Architect STS :

baseurl/infosharestswebappname/issue/wsfed

where baseurl and infosharestswebappname are the values specified for the baseurl and infosharestswebapname parameters.

• Microsoft AD FS 2.0:

https://adfshost/adfs/ls/

• any other STS: specify the value based on the requirements for that STS.

Realm

Specify the URL of the SDL Enrich Website.

By default it will use the server’s fully qualified name. If the default port has been changed, update the realm to use the default realm.
Certificate Thumbprint

Specify the thumbprint of the signing certificate on the configured STS.

You can configureSDL Enrich to either use the SDL LiveContent Architect STS (aka InfoShareSTS) or use another STS such as Microsoft AD FS 2.0.

Instructions to obtain the thumbprint are linked below.

An example of a thumbprint is "51c3247d 60f356c8ca3ba4c3f429dac93ee7b74"
Claims settings
Admin Role

Specify the name of the role for administrators. Administrators will manage and configure SDL Enrich.

•SDL LiveContent Architect STS: VUSERROLEADMINISTRATOR

•Microsoft AD FS 2.0: add or use an existing Role Claim, e.g. SDLAuthoringAdministrator

•any other STS: specify the role value used for administrators

User Role

Specify the name of the role for writers.

•SDL LiveContent Architect STS: VUSERROLEAUTHOR

•Microsoft AD FS 2.0: SDLAuthoringUser

•any other STS: specify the role value used for authors and reviewers