Software compatibility across releases
Information about third-party or client software is packaged, configured and tested for a specific software version release.
Version Overview
Content Manager is qualified on an English version of our supported operating systems only. Other languages of these operational systems are not used for quality check purposes.
The following table — available for informational purposes only — indicates:
- The Content Manager client tools versions which should be used against a certain release of the server side components.
- The Third Party software which is configured or integrated inside a certain release of the server side components.
- The Third Party software such as operating systems, databases, and runtimes which we use to conduct quality assurance testing for the server side components.
Be aware that:
- Exact versions indicate a version which we did regression testing; these are usually also available for download. Note that other versions may work but are not quality assured. If a problem is encountered we only accept the issue if it is reproducible on the listed versions.
- The relation between the Content Manager client tools and the XML editors are not defined in this table. Installation packages are not always available for all XML editor versions.
- For the most up-to-date information you should always verify the latest installation documentation. There are other requirements than the ones listed here.
- The names, trademarks, designs, logos, service marks, intellectual property, etc., of the products shown are exclusive property of their respective owners.
Terminology used:
- S: is short for Supported which means that the software was used, configured or integrated in the version.
- -: means that there is no information available for this combination. Usually because one of them was not around yet during the mentioned era or because it is simply not a supported combination anymore.
- D: is short for Deprecated which means the software was used/configured or integrated in the version; but you are strongly advised to not use this combination anymore.
| 12.0.x / 2016 | 13.0.x / 13 | 14.0.x / 14 | |
|---|---|---|---|
| SDL Knowledge Center Publication Manager 12.0.x | S | - | - |
| SDL Tridion Docs Publication Manager 13.0.x | - | S1 | - |
| SDL Tridion Docs Publication Manager 14.0.x | - | - | S |
| SDL Knowledge Center Authoring Bridge 12.0.x | S | - | - |
| SDL Tridion Docs Authoring Bridge 13.0.x | S2 | - | |
| SDL Tridion Docs Authoring Bridge 14.0.x | - | - | S |
| SDL Knowledge Center Condition Manager 12.0.x | S | - | - |
| SDL Tridion Docs Condition Manager 13.0.x | - | S3 | - |
| SDL Tridion Docs Condition Manager 14.0.x | - | - | S |
| SDL Knowledge Center Content Importer 12.0.x | S | - | - |
| SDL Tridion Docs Content Importer 13.0.x | - | S4 | - |
| SDL Tridion Docs Content Importer 14.0.x | - | - | S |
| SDL LiveContent Reach 7.3 | D | - | - |
| SDL Knowledge Center Content Delivery 7.4 | S | - | - |
| SDL Knowledge Center Content Delivery 7.5 | S | D | D5 |
| SDL Knowledge Center Collaborative Review 7.6 | S | S | D6 |
| SDL Tridion Docs Collaborative Review 7.7 | - | S | D7 |
| SDL Tridion Docs Content Delivery (UDP) 10.1.0 | - | S 8 | - |
| SDL Tridion Docs Content Delivery (UDP) 10.1.1 | - | S 9 | D |
| SDL Tridion Docs Content Delivery (DXD/UDP) 11.0.0 | - | - 10 | D 11 |
| SDL Tridion Docs Content Delivery (DXD/UDP) 11.1.0 | - | - | S 12 |
| SDL Tridion Docs Content Delivery (DXD/UDP) 11.5.0 | - | - | S 13 |
| SDL Web 8.5 | - | S 14 | - 15 |
| SDL Tridion Sites 9 | - | S 16 | D17 |
| SDL Tridion Sites 9.1 | - | - | S 18 |
| SDL Tridion Sites 9.5 | - | - | S 19 |
| SDL TMS 2011 SP4 CU2 | D | - | - |
| SDL TMS 2011 SP5 CU2 | D | - | - |
| SDL TMS 2011 SP6 CU1 | S | - | - |
| SDL TMS 11.0.x | S | S | D |
| SDL TMS 11.1.x | S | S | D |
| SDL TMS 11.2.x | S | S | D |
| SDL TMS 11.3.x | - | S 20 | D |
| SDL TMS 11.4.x | - | S 21 | D |
| SDL TMS 12.0.x | - | S 22 | D |
| SDL TMS 12.1.x | - | - | D |
| SDL TMS 12.2.x | - | - | D |
| SDL TMS 12.3.x | - | - | D |
| SDL TMS 12.4.x | - | - | S 23 |
| SDL TMS 12.5.x | - | - | S 24 |
| SDL WorldServer 10.4.4 | S | - | - |
| SDL WorldServer 11.0.x | S | S | D |
| SDL WorldServer 11.1.x | S | S | D |
| SDL WorldServer 11.2.x | - | S 25 | D 26 |
| SDL WorldServer 11.3.x | - | S 27 | D 28 |
| SDL WorldServer 11.4.x | - | - | D 29 |
| SDL WorldServer 11.5.x | - | - | S 30 |
| SDL WorldServer 11.6.x | - | - | S 31 |
| SDL Quality Assistant 2.2.0 | S32 | S33 | - |
| SDL XPP 9.1 | S | S | D |
| Microsoft Windows 7 | D | - | - |
| Microsoft Windows 8.1 | S | D34 | D |
| Microsoft Windows 10 | S | S35 | S |
| PTC Arbortext Editor 6.0 (32-bit) support files | D 36 | - | - |
| PTC Arbortext Editor 7.0 (32-bit) support files | S | -37 | - |
| PTC Arbortext Editor 7.1 (64-bit) support files | - | S38 | S |
| PTC Arbortext Editor 8.0 (64-bit) support files | - | - | - |
| JustSystems XMetaL 9.0 (32-bit) support files | D | - | - |
| JustSystems XMetaL 10.0 / 10.0 (Japanese) (32-bit) support files | S | -39 | - |
| JustSystems XMetaL 11.0 (32-bit) support files | S 40 | -41 | - |
| JustSystems XMetaL 12.0 / 12.0 (Japanese) (64-bit) support files | - | S42 | D43 |
| JustSystems XMetaL 13.0 (64-bit) support files | - | - | - |
| JustSystems XMetaL 14.0 (64-bit) support files | - | - | S44 |
| Syncro Soft <oXygen/> XML Author 16.0 (32-bit) support files45 | D | - | - |
| Syncro Soft <oXygen/> XML Author 17.1 (32-bit) support files46 | S | -47 | - |
| Syncro Soft <oXygen/> XML Author 19.1 (64-bit) support files48 | - | D49 | - |
| Syncro Soft <oXygen/> XML Author 20.0 (64-bit) support files50 | - | S51 | D |
| Syncro Soft <oXygen/> XML Author 21.1 (64-bit) support files52 | - | - | S53 |
| Microsoft Windows 2012 R2 (64-bit) | S | D | - |
| Microsoft Windows 2016 (64-bit) SP1 | - | S | D |
| Microsoft Windows 2019 (64-bit) | - | - | S |
| Microsoft Windows PowerShell 4.0 (part of Windows Management Framework 4.0) | S | - | - |
| Microsoft Windows PowerShell 5.0 (part of Windows Management Framework 5.0) | S | D | - |
| Microsoft Windows PowerShell 5.1 (part of Windows Management Framework 5.1) | S | S | S |
| Microsoft PowerShell 7 | - | - | - |
| Microsoft .NET Framework 4.6.1 | S | S | - |
| Microsoft .NET Framework 4.7.2 | - | - | D |
| Microsoft .NET Framework 4.8.0 | - | - | S |
| Microsoft Active Directory Federated Services (ADFS) 2.0 | D | - | - |
| Microsoft Active Directory Federated Services (ADFS) 2.1 | D | D | D |
| Microsoft Active Directory Federated Services (ADFS) 3.0 | S | S | S |
| Oracle Data Access Client 12.1.0.1.2 | S | - | - |
| Oracle Data Access Client 12.2.0.1.0 | - | S | - |
| Oracle Data Access Client 19.3.0.0.0 | - | - | S 54 |
| Oracle RDBMs 11.2.0.4 | D | - | - |
| Oracle RDBMs 12.1.0.2 | S | D | D |
| Oracle RDBMs 12.2.0.1 | - | S 55 | D |
| Oracle RDBMs 19.3.0.0 | - | - | S 56 |
| Microsoft SQL Server 2012 SP1 | D | - | - |
| Microsoft SQL Server 2012 SP2 | D | - | - |
| Microsoft SQL Server 2012 SP3 | S | - | - |
| Microsoft SQL Server 2014 SP1 | S | - | - |
| Microsoft SQL Server 2014 SP2 | - | D | - |
| Microsoft SQL Server 2016 SP1 | - | S | D |
| Microsoft SQL Server 2016 SP2 | - | - | D |
| Microsoft SQL Server 2017 | - | S 57 | D |
| Microsoft SQL Server 2019 | - | - | S58 |
| DITA-OT 1.8.5 | S | - | - |
| DITA-OT 2.3 | - | S | S |
| Java Runtime 1.7.0_21 (64-bit) | D | - | - |
| Java Runtime 1.8.0_60 (64-bit) | S | - | - |
| Java Runtime 1.8.0_91 (64-bit) | S | - | - |
| Java Runtime 1.8.0_112 (64-bit) | S | - | - |
| Java Runtime 1.8.0_144 (64-bit) | - | D | - |
| Java Runtime 10.0.1 (64-bit) | - | D | - |
| Java Development Kit 1.7.0_21 (64-bit) | D | - | - |
| Java Development Kit 1.8.0_60 (64-bit) | S | - | - |
| Java Development Kit 1.8.0_91 (64-bit) | S | - | - |
| Java Development Kit 1.8.0_112 (64-bit) | S | - | - |
| Java Development Kit 1.8.0_144 (64-bit) | - | D | - |
| Java Development Kit 10.0.1 (64-bit) | - | D 59 | - |
| Java Development Kit 11.0.4 (64-bit) also known as 18.9 LTS | - | - | S |
| Eclipse Temurin OpenJDK 11 (formerly known as AdoptOpenJDK OpenJDK 11) with Hotspot 11.0.0+28 (64-bit) | - | S | D |
| Eclipse Temurin OpenJDK 11 (formerly known as AdoptOpenJDK OpenJDK 11) with Hotspot 11.0.3+7 (64-bit) | - | - | D |
| Eclipse Temurin OpenJDK 11 (formerly known as AdoptOpenJDK OpenJDK 11) with Hotspot 11.0.5+10 (64-bit) | - | - | S |
| IBM DITA 1.3.2 DTD/Catalog configuration60 | D61 | D62 | D63 |
| OASIS DITA 1.0 DTD/Catalog configuration | D64 | D65 | D66 |
| OASIS DITA 1.1 DTD/Catalog configuration | D67 | D68 | D69 |
| OASIS DITA 1.2 DTD/Catalog configuration | S | S | S |
| OASIS DITA 1.3 DTD/Catalog configuration | - | S 70 | S 71 |
| SDL DITA 1.3 DTD/Catalog configuration | - | S 72 | S 73 |
| AntennaHouse XSL Formatter 6.2 | S | - | - |
| AntennaHouse XSL Formatter 6.5 | - | S | D |
| AntennaHouse XSL Formatter 6.6 | - | - | D |
| AntennaHouse XSL Formatter 7.0 | - | - | S |
| Microsoft Internet Explorer 10 | D | - | - |
| Microsoft Internet Explorer 11 | S | S | - 74 |
| Microsoft Edge (Spartan/LegacyEdge) | - | S | D 75 |
| Microsoft Edge (Chromium-based; Microsoft's Modern Lifecycle Policy release update channel ) | - | - | S 76 |
| Google Chrome (Chromium-based; release update channel) | S 77 | S 78 | S 79 |
| Mozilla FireFox (release update channel) | S80 | S81 | S 82 |
| Acrolinx 5.0 | - | - | S |
| Acrolinx Plug-in for Oxygen | S 83 | S 8485 | S 8687 |
| Acrolinx Plug-in for XMetaL | S 88 89 | S 9091 | S 92939495 |
| SmartLogic Semantic Enhancement Server 3.7.3 | S96 | S97 | S 98 |
1 Starting from 13.0.1 only Publication Manager (64-bit) is supported
2 Starting from 13.0.1 only Authoring Bridge (64-bit) is supported
3 Starting from 13.0.1 only Condition Manager (64bit) is supported
4 Starting from 13.0.1 only Content Importer (64-bit) is supported
5 Support removed in 14SP1/14.0.1 as publicly announced on 14/14.0.0.
6 Support removed in 14SP1/14.0.1 as publicly announced on 14/14.0.0.
7 Support removed in 14SP1/14.0.1 as publicly announced on 14/14.0.0.
8 DXA for Dynamic Documentation (DDWebApp) 1.1.0 (Java)supports DXD 10.1.0.
9 Starting from 13.0.1 DXA for Dynamic Documentation (DDWebApp) 1.2.0 (Java) supports DXD 10.1.1.
10 Starting from 13.0.2 DXA for Dynamic Documentation (DDWebApp) 1.2.1 (Java) and 2.1 (.NET) supports DXD 11.0.0.
11 DXA for Dynamic Documentation (DDWebApp) 1.2.1 (Java) and 2.2 (Java/.NET) supports DXD 11.0.0.
12 DXA for Dynamic Documentation (DDWebApp) 1.2.1 (Java) and 2.2 (Java/.NET) supports DXD 11.1.0.
13 DXA for Dynamic Documentation (DDWebApp) 1.2.1 (Java) and 2.2.6+ (Java/.NET) supports DXD 11.5.0.
14 Support added in 13.0.1 via Tridion Sites Taxonomy Connector
15 Support removed in 14.0.2 because of .NET Standard based Tridion Sites Taxonomy Connector
16 Support added in 13.0.1 via Tridion Sites Taxonomy Connector
17 Support added in 14.0.2 over .NET-Standard -based Tridion Sites Taxonomy Connector
18 Support added in 14.0.2 over .NET-Standard-based Tridion Sites Taxonomy Connector
19 Support added in 14.0.2 over .NET-Standard-based Tridion Sites Taxonomy Connector
20 The earliest TMS version that supports the translation reject flow.
21 Support added in 13.0.1
22 Support added in 13.0.1
23 Support added in 14.0.1
24 Support added in 14.0.2
25 Both SOAP and REST API protocol can be used, default is REST. Use REST API protocol to support the new translation reject flow.
26 Both SOAP and REST API protocol can be used, default is REST. Use REST API protocol to support the new translation reject flow.
27 Both SOAP and REST API protocol can be used, default is REST. Use REST API protocol to support the new translation reject flow.
28 Both SOAP and REST API protocol can be used, default is REST. Use REST API protocol to support the new translation reject flow.
29 Both SOAP and REST API protocol can be used, default is REST. Use REST API protocol to support the new translation reject flow.
30 Support added in 14.0.1
31 Support added in 14.0.2
32 Verified for Content Editor integration.
33 Verified for Content Editor integration.
34 Starting from 13.0.1 only Microsoft Windows 8 / 8.1 (64-bit) is supported
35 Starting from 13.0.1 only Microsoft Windows 10 (64-bit) is supported
36 Note that 6.0 doesn't support various DITA 1.2 features like keyref or conref ranges.
37 Support removed in 13.0.1 for PTC Arbortext Editor 7.0 (32-bit)
38 Support added in 13.0.1 for PTC Arbortext Editor 7.1 (64-bit) - verified on F000
39 Support removed in 13.0.1 for JustSystems XMetaL 10.0 / 10.0 (Japanese) (32-bit)
40 Support added in 12.0.1 for JustSystems XMetaL 11.0 - verified on version 11.0.0.083
41 Support removed in 13.0.1 for JustSystems XMetaL 11.0
42 Support added in 13.0.1 for JustSystems XMetaL 12.0 / 12.0 (Japanese) (64-bit) - verified on version 12.0.0.057 / 12.0.0.073 J
43 JustSystems XMetaL indicated that a J(apanese) edition is not happening for 14 and up. Customers should migrate to the regular edition.
44 Support added in 14.0.1 for JustSystems XMetaL 14.0 (64-bit). JustSystems XMetaL indicated that a J(apanese) edition is not happening for 14 and up. Customers should migrate to the regular edition.
45 Support on Windows platform only
46 Support on Windows platform only
47 Support removed in 13.0.1 for Syncro Soft <oXygen/> XML Author 17.1 (32-bit)
48 Support on Windows platform only
49 Support added in 13.0.1 for Syncro Soft <oXygen/> XML Author 20.0 (64-bit) - verified on XML Author 20.0, build 2018032903
50 Support on Windows platform only
51 Support added in 13.0.1 for Syncro Soft <oXygen/> XML Author 20.0 (64-bit) - verified on XML Author 20.0, build 2018032903
52 Support on Windows platform only
53 Support added in 14.0.1 for Syncro Soft <oXygen/> XML Author 21.1 (64-bit)
54 Support added in 14.0.1
55 Support added in 13.0.2
56 Support added in 14.0.1
57 Support added in 13.0.2
58 Support added in 14.0.2
59 Not a Long Term Service release.
60 We strongly advise to change to OASIS DITA. The provided IBM DITA setup is only for backward compatibility. No new features will be implemented on these DTDs.
61 We strongly advise to change to OASIS DITA. The provided IBM DITA setup is only for backward compatibility. No new features will be implemented on these DTDs.
62 We strongly advise to change to OASIS DITA. The provided IBM DITA setup is only for backward compatibility. No new features will be implemented on these DTDs.
63 We strongly advise to change to OASIS DITA. The provided IBM DITA setup is only for backward compatibility. No new features will be implemented on these DTDs.
64 The public identifier of OASIS DITA has no version, so when we introduced OASIS DITA 1.1 we had to redirect the version-less identifier to this latest fully backward compatible version in our catalog files.
65 The public identifier of OASIS DITA has no version, so when we introduced OASIS DITA 1.1 we had to redirect the version-less identifier to this latest fully backward compatible version in our catalog files.
66 The public identifier of OASIS DITA has no version, so when we introduced OASIS DITA 1.1 we had to redirect the version-less identifier to this latest fully backward compatible version in our catalog files.
67 The public identifier of OASIS DITA has no version, so when we introduced OASIS DITA 1.2 we had to redirect the version-less identifier to this latest fully backward compatible version in our catalog files.
68 The public identifier of OASIS DITA has no version, so when we introduced OASIS DITA 1.2 we had to redirect the version-less identifier to this latest fully backward compatible version in our catalog files.
69 The public identifier of OASIS DITA has no version, so when we introduced OASIS DITA 1.2 we had to redirect the version-less identifier to this latest fully backward compatible version in our catalog files.
70 Support added in 13.0.2. Technically unreachable as public identifiers of OASIS DITA without version are redirected to the SDL provided OASIS DITA 1.2 for backward compatibility.
71 Technically unreachable as public identifiers of OASIS DITA without version are redirected to the SDL provided OASIS DITA 1.2 for backward compatibility.
72 Support added in 13.0.2. Only reachable when using editor templates holding SDL DITA public identifiers.
73 Only reachable when using editor templates holding SDL DITA public identifiers.
74 Microsoft Internet Explorer (any version) is not supported.
75 Referring to the pre-chromium based browser, the Edge browser engine has been marked deprecated by Microsoft.
76 Support added in 14.0.2
77 Verified on version 45
78 Verified on version 61
79 Verified on version 67
80 Verified on version 41
81 Verified on version 56
82 Verified on version 75
83 Verified for oXygen 17.1 using Acrolinx 3.4.0 build 4179
84 Verified for oXygen 17.1 using Acrolinx classic plugin 3.5.1
85 Verified for oXygen 20.0 using Acrolinx sidebar plugin 1.1, 1.2, 1.3,1.4, 1.5 or 1.6
86 Verified for oXygen 20.0 using Acrolinx sidebar plugin 1.1, 1.2, 1.3, 1.4, 1.5 or 1.6
87 Verified for oXygen 21.1 using Acrolinx sidebar plugin 1.5 or 1.6
88 Verified for XMetaL 10 using Acrolinx 4.2.0 build 1153
89 Verified for XMetaL 11 using Acrolinx 4.7.0 build 5
90 Verified for XMetaL 11 using Acrolinx 4.7.2 for 13.0.0
91 Verified for XMetaL 12 using Acrolinx sidebar plugin 1.1 for 13.0.1
92 Verified for XMetaL 12 using Acrolinx sidebar plugin 1.1 for 14.0.1
93 Verified for XMetaL 12 using Acrolinx sidebar plugin 1.2, 1.2.1 or 1.3 for 14.0.2
94 Verified for XMetaL 13 using Acrolinx sidebar plugin 1.2, 1.2.1 or 1.3 for 14.0.2
95 Verified for XMetaL 14 using Acrolinx sidebar plugin 1.3 for 14.0.2
96 Verified for IMetadataBinding integration.
97 Verified for IMetadataBinding integration.
98 Verified for IMetadataBinding integration.