Software compatibility across releases
Information about third party or client software is packaged, configured and tested for a specific software version release.
Version Overview
Content Manager is qualified on an English version of our supported operating systems only. Other languages of these operational systems are not used for quality check purposes.
The following table — available for informational purposes only — indicates:
- The Content Manager client tools versions which should be used against a certain release of the server side components.
- The Third Party software which is configured or integrated inside a certain release of the server side components.
- The Third Party software such as operating systems, databases, and runtimes which we use to conduct quality assurance testing for the server side components.
Be aware that:
- Exact versions indicate a version which we did regression testing; these are usually also available for download. Note that other versions may work but are not quality assured. If a problem is encountered we only accept the issue if it is reproducible on the listed versions.
- The relation between the Content Manager client tools and the XML editors are not defined in this table. Installation packages are not always available for all XML editor versions.
- For the most up-to-date information you should always verify the latest installation documentation. There are other requirements than the ones listed here.
- The names, trademarks, designs, logos, service marks, intellectual property, etc., of the products shown are exclusive property of their respective owners.
Terminology used:
- S: is short for Supported which means that the software was used, configured or integrated in the version.
- -: means that there is no information available for this combination. Usually because one of them was not around yet during the mentioned era or because it is simply not a supported combination anymore.
- D: is short for Deprecated which means the software was used/configured or integrated in the version; but you are strongly advised to not use this combination anymore.
| 12.0.x / 2016 | 13.0.x / 13 | 14.0.x / 14 | |
|---|---|---|---|
| SDL Knowledge Center Publication Manager 12.0.x | S | - | - |
| SDL Tridion Docs Publication Manager 13.0.x | - | S1 | S |
| SDL Tridion Docs Publication Manager 14.0.x | - | - | S |
| SDL Knowledge Center Authoring Bridge 12.0.x | S | - | - |
| SDL Tridion Docs Authoring Bridge 13.0.x | S2 | - | |
| SDL Tridion Docs Authoring Bridge 14.0.x | - | - | S |
| SDL Knowledge Center Condition Manager 12.0.x | S | - | - |
| SDL Tridion Docs Condition Manager 13.0.x | - | S3 | - |
| SDL Tridion Docs Condition Manager 14.0.x | - | - | S |
| SDL Knowledge Center Content Importer 12.0.x | S | - | - |
| SDL Tridion Docs Content Importer 13.0.x | - | S4 | - |
| SDL Tridion Docs Content Importer 14.0.x | - | - | S |
| SDL LiveContent Reach 7.3 | D | - | - |
| SDL Knowledge Center Content Delivery 7.4 | S | - | - |
| SDL Knowledge Center Content Delivery 7.5 | S | D | D |
| SDL Knowledge Center Collaborative Review 7.6 | S | S | S |
| SDL Tridion Docs Collaborative Review 7.7 | - | S | S |
| SDL Tridion Docs Content Delivery (UDP) 10.1.0 | - | S 5 | - |
| SDL Tridion Docs Content Delivery (UDP) 10.1.1 | - | S 6 | D |
| SDL Tridion Docs Content Delivery (DXD/UDP) 11.0.0 | - | - 7 | S 8 |
| SDL Tridion Docs Content Delivery (DXD/UDP) 11.1.0 | - | - | S 9 |
| SDL Web 8.5 | - | S 10 | S |
| SDL Tridion Sites 9 | - | S 11 | S |
| SDL Tridion Sites 9.1 | - | - | -12 |
| SDL TMS 2011 SP4 CU2 | D | - | - |
| SDL TMS 2011 SP5 CU2 | D | - | - |
| SDL TMS 2011 SP6 CU1 | S | - | - |
| SDL TMS 11.0.x | S | S | D |
| SDL TMS 11.1.x | S | S | D |
| SDL TMS 11.2.x | S | S | D |
| SDL TMS 11.3.x | - | S 13 | D |
| SDL TMS 11.4.x | - | S 14 | D |
| SDL TMS 12.0.x | - | S 15 | D |
| SDL TMS 12.1.x | - | - | D |
| SDL TMS 12.2.x | - | - | S |
| SDL WorldServer 10.4.4 | S | - | - |
| SDL WorldServer 11.0.x | S | S | D |
| SDL WorldServer 11.1.x | S | S | D |
| SDL WorldServer 11.2.x | - | S 16 | D 17 |
| SDL WorldServer 11.3.x | - | S 18 | S 19 |
| SDL WorldServer 11.4.x | - | - | S 20 |
| SDL Quality Assistant 2.2.0 | S21 | S22 | - |
| SDL XPP 9.1 | S | S | S |
| Microsoft Windows 7 | D | - | - |
| Microsoft Windows 8.1 | S | D23 | D |
| Microsoft Windows 10 | S | S24 | S |
| PTC Arbortext Editor 6.0 (32-bit) support files | D 25 | - | - |
| PTC Arbortext Editor 7.0 (32-bit) support files | S | -26 | - |
| PTC Arbortext Editor 7.1 (64-bit) support files | - | S27 | S |
| JustSystems XMetaL 9.0 (32-bit) support files | D | - | - |
| JustSystems XMetaL 10.0 / 10.0 (Japanese) (32-bit) support files | S | -28 | - |
| JustSystems XMetaL 11.0 (32-bit) support files | S 29 | -30 | - |
| JustSystems XMetaL 12.0 / 12.0 (Japanese) (64-bit) support files | - | S31 | S |
| Syncro Soft <oXygen/> XML Author 16.0 (32-bit) support files32 | D | - | - |
| Syncro Soft <oXygen/> XML Author 17.1 (32-bit) support files33 | S | -34 | - |
| Syncro Soft <oXygen/> XML Author 19.1 (64-bit) support files35 | - | D36 | - |
| Syncro Soft <oXygen/> XML Author 20.0 (64-bit) support files37 | - | S38 | S |
| Microsoft Windows 2012 R2 (64-bit) | S | D | - |
| Microsoft Windows 2016 (64-bit) SP1 | - | S | D |
| Microsoft Windows 2019 (64-bit) | - | - | S |
| Microsoft Windows PowerShell 4.0 (part of Windows Management Framework 4.0) | S | - | - |
| Microsoft Windows PowerShell 5.0 (part of Windows Management Framework 5.0) | S | D | - |
| Microsoft Windows PowerShell 5.1 (part of Windows Management Framework 5.1) | S | S | S |
| Microsoft .NET Framework 4.6.1 | S | S | - |
| Microsoft .NET Framework 4.7.2 | - | - | S |
| Microsoft Active Directory Federated Services (ADFS) 2.0 | D | - | - |
| Microsoft Active Directory Federated Services (ADFS) 2.1 | D | D | D |
| Microsoft Active Directory Federated Services (ADFS) 3.0 | S | S | S |
| Oracle Data Access Client 12.1.0.1.2 | S | - | - |
| Oracle Data Access Client 12.2.0.1.0 | - | S | S |
| Oracle RDBMs 11.2.0.4 | D | - | - |
| Oracle RDBMs 12.1.0.2 | S | D | D |
| Oracle RDBMs 12.2.0.1 | - | S 39 | S |
| Microsoft SQL Server 2012 SP1 | D | - | - |
| Microsoft SQL Server 2012 SP2 | D | - | - |
| Microsoft SQL Server 2012 SP3 | S | - | - |
| Microsoft SQL Server 2014 SP1 | S | - | - |
| Microsoft SQL Server 2014 SP2 | - | D | - |
| Microsoft SQL Server 2016 SP1 | - | D | D |
| Microsoft SQL Server 2016 SP2 | - | - | D |
| Microsoft SQL Server 2017 | - | S 40 | S |
| DITA-OT 1.8.5 | S | - | - |
| DITA-OT 2.3 | - | S | S |
| Java Runtime 1.7.0_21 (64-bit) | D | - | - |
| Java Runtime 1.8.0_60 (64-bit) | S | - | - |
| Java Runtime 1.8.0_91 (64-bit) | S | - | - |
| Java Runtime 1.8.0_112 (64-bit) | S | - | - |
| Java Runtime 1.8.0_144 (64-bit) | - | D | - |
| Java Runtime 10.0.1 (64-bit) | - | D | - |
| Java Development Kit 1.7.0_21 (64-bit) | D | - | - |
| Java Development Kit 1.8.0_60 (64-bit) | S | - | - |
| Java Development Kit 1.8.0_91 (64-bit) | S | - | - |
| Java Development Kit 1.8.0_112 (64-bit) | S | - | - |
| Java Development Kit 1.8.0_144 (64-bit) | - | D | - |
| Java Development Kit 10.0.1 (64-bit) | - | D 41 | - |
| Eclipse Temurin OpenJDK 11 (formerly known as AdoptOpenJDK OpenJDK 11) with Hotspot 11.0.0+28 (64-bit) | - | S | D |
| Eclipse Temurin OpenJDK 11 (formerly known as AdoptOpenJDK OpenJDK 11) with Hotspot 11.0.3+7 (64-bit) | - | - | S |
| IBM DITA 1.3.2 DTD/Catalog configuration42 | D43 | D44 | D45 |
| OASIS DITA 1.0 DTD/Catalog configuration | D46 | D47 | D48 |
| OASIS DITA 1.1 DTD/Catalog configuration | D49 | D50 | D51 |
| OASIS DITA 1.2 DTD/Catalog configuration | S | S | S |
| OASIS DITA 1.3 DTD/Catalog configuration | - | S 52 | S 53 |
| SDL DITA 1.3 DTD/Catalog configuration | - | S 54 | S 55 |
| AntennaHouse XSL Formatter 6.2 | S | - | - |
| AntennaHouse XSL Formatter 6.5 | - | S | D |
| AntennaHouse XSL Formatter 6.5 | - | - | S |
| Microsoft Internet Explorer 10 | D | - | - |
| Microsoft Internet Explorer 11 | S | S | -56 |
| Microsoft Edge (Spartan) | - | S | S |
| Google Chrome (release update channel) | S 57 | S 58 | S 59 |
| Mozilla FireFox (release update channel) | S60 | S61 | S 62 |
| Acrolinx 5.0 | - | - | S |
| Acrolinx Plug-in for Oxygen | S 63 | S 6465 | S 66 |
| Acrolinx Plug-in for XMetaL | S 67 68 | S 6970 | S 71 |
| SmartLogic Semantic Enhancement Server 3.7.3 | S72 | S73 | S 74 |
1 Starting from 13.0.1 only Publication Manager (64-bit) is supported
2 Starting from 13.0.1 only Authoring Bridge (64-bit) is supported
3 Starting from 13.0.1 only Condition Manager (64bit) is supported
4 Starting from 13.0.1 only Content Importer (64-bit) is supported
5 DXA for Dynamic Documentation (DDWebApp) 1.1.0 (Java)supports DXD 10.1.0.
6 Starting from 13.0.1 DXA for Dynamic Documentation (DDWebApp) 1.2.0 (Java) supports DXD 10.1.1.
7 Starting from 13.0.2 DXA for Dynamic Documentation (DDWebApp) 1.2.1 (Java) and 2.1 (.NET) supports DXD 11.0.0.
8 DXA for Dynamic Documentation (DDWebApp) 1.2.1 (Java) and 2.1 (.NET) supports DXD 11.0.0.
9 DXA for Dynamic Documentation (DDWebApp) 1.2.1 (Java) and 2.2 (.NET) supports DXD 11.1.0.
10 Support added in 13.0.1 via Tridion Sites Taxonomy Connector
11 Support added in 13.0.1 via Tridion Sites Taxonomy Connector
12 Support coming when Sites 9.1 delivering DXD 11.1.0 is publicly available.
13 The earliest TMS version that supports the translation reject flow.
14 Support added in 13.0.1
15 Support added in 13.0.1
16 Both SOAP and REST API protocol can be used, default is REST. Use REST API protocol to support the new translation reject flow.
17 Both SOAP and REST API protocol can be used, default is REST. Use REST API protocol to support the new translation reject flow.
18 Both SOAP and REST API protocol can be used, default is REST. Use REST API protocol to support the new translation reject flow.
19 Both SOAP and REST API protocol can be used, default is REST. Use REST API protocol to support the new translation reject flow.
20 Both SOAP and REST API protocol can be used, default is REST. Use REST API protocol to support the new translation reject flow.
21 Verified for Content Editor integration.
22 Verified for Content Editor integration.
23 Starting from 13.0.1 only Microsoft Windows 8 / 8.1 (64-bit) is supported
24 Starting from 13.0.1 only Microsoft Windows 10 (64-bit) is supported
25 Note that 6.0 doesn't support various DITA 1.2 features like keyref or conref ranges.
26 Support removed in 13.0.1 for PTC Arbortext Editor 7.0 (32-bit)
27 Support added in 13.0.1 for PTC Arbortext Editor 7.1 (64-bit) - verified on F000
28 Support removed in 13.0.1 for JustSystems XMetaL 10.0 / 10.0 (Japanese) (32-bit)
29 Support added in 12.0.1 for JustSystems XMetaL 11.0 - verified on version 11.0.0.083
30 Support removed in 13.0.1 for JustSystems XMetaL 11.0
31 Support added in 13.0.1 for JustSystems XMetaL 12.0 / 12.0 (Japanese) (64-bit) - verified on version 12.0.0.057 / 12.0.0.073 J
32 Support on Windows platform only
33 Support on Windows platform only
34 Support removed in 13.0.1 for Syncro Soft <oXygen/> XML Author 17.1 (32-bit)
35 Support on Windows platform only
36 Support added in 13.0.1 for Syncro Soft <oXygen/> XML Author 20.0 (64-bit) - verified on XML Author 20.0, build 2018032903
37 Support on Windows platform only
38 Support added in 13.0.1 for Syncro Soft <oXygen/> XML Author 20.0 (64-bit) - verified on XML Author 20.0, build 2018032903
39 Support added in 13.0.2
40 Support added in 13.0.2
41 Not a Long Term Service release.
42 We strongly advise to change to OASIS DITA. The provided IBM DITA setup is only for backward compatibility. No new features will be implemented on these DTDs.
43 We strongly advise to change to OASIS DITA. The provided IBM DITA setup is only for backward compatibility. No new features will be implemented on these DTDs.
44 We strongly advise to change to OASIS DITA. The provided IBM DITA setup is only for backward compatibility. No new features will be implemented on these DTDs.
45 We strongly advise to change to OASIS DITA. The provided IBM DITA setup is only for backward compatibility. No new features will be implemented on these DTDs.
46 The public identifier of OASIS DITA has no version, so when we introduced OASIS DITA 1.1 we had to redirect the version-less identifier to this latest fully backward compatible version in our catalog files.
47 The public identifier of OASIS DITA has no version, so when we introduced OASIS DITA 1.1 we had to redirect the version-less identifier to this latest fully backward compatible version in our catalog files.
48 The public identifier of OASIS DITA has no version, so when we introduced OASIS DITA 1.1 we had to redirect the version-less identifier to this latest fully backward compatible version in our catalog files.
49 The public identifier of OASIS DITA has no version, so when we introduced OASIS DITA 1.2 we had to redirect the version-less identifier to this latest fully backward compatible version in our catalog files.
50 The public identifier of OASIS DITA has no version, so when we introduced OASIS DITA 1.2 we had to redirect the version-less identifier to this latest fully backward compatible version in our catalog files.
51 The public identifier of OASIS DITA has no version, so when we introduced OASIS DITA 1.2 we had to redirect the version-less identifier to this latest fully backward compatible version in our catalog files.
52 Support added in 13.0.2. Technically unreachable as public identifiers of OASIS DITA without version are redirected to the SDL provided OASIS DITA 1.2 for backward compatibility.
53 Technically unreachable as public identifiers of OASIS DITA without version are redirected to the SDL provided OASIS DITA 1.2 for backward compatibility.
54 Support added in 13.0.2. Only reachable when using editor templates holding SDL DITA public identifiers.
55 Only reachable when using editor templates holding SDL DITA public identifiers.
56 Microsoft Internet Explorer (any version) is not supported with SDL Collective Spaces (Draft Space, Review Space).
57 Verified on version 45
58 Verified on version 61
59 Verified on version 67
60 Verified on version 41
61 Verified on version 56
62 Verified on version 75
63 Verified for oXygen 17.1 using Acrolinx 3.4.0 build 4179
64 Verified for oXygen 17.1 using Acrolinx classic plugin 3.5.1 for 13.0.0
65 Verified for oXygen 20.0 using Acrolinx sidebar plugin 1.0.0.378 for 13.0.1
66 Verified for oXygen 20.0 using Acrolinx sidebar plugin 1.0.0.378 for 13.0.1
67 Verified for XMetaL 10 using Acrolinx 4.2.0 build 1153
68 Verified for XMetaL 11 using Acrolinx 4.7.0 build 5
69 Verified for XMetaL 11 using Acrolinx 4.7.2 for 13.0.0
70 Verified for XMetaL 12 using Acrolinx sidebar plugin 1.1 for 13.0.1
71 Verified for XMetaL 12 using Acrolinx sidebar plugin 1.1 for 13.0.1
72 Verified for IMetadataBinding integration.
73 Verified for IMetadataBinding integration.
74 Verified for IMetadataBinding integration.